Ford Ranger Pedders 1.75 Inch Suspension Lift Kit. With Improved Ride & Assembled struts

Suitable for -

Ford Ranger 2WD Hi-Ride 2011-2015 
Ford Ranger 4WD 2011-2015 
Ford Ranger 4WD 2015-6/2018 MkII
Ford Ranger 4WD 07/2018 to 07/2019 MkIII 2.2 & 3.2
Ford Ranger 4WD 07/2018 to 07/2019 MkIII

Improved looks, ride comfort and ground clearance.
Are you looking to raise your Ford Ranger? Want a better ride?
Then Pedders Suspension have the solution for you.
This kit features our excellent Pedders TrakRyder Foam Cell shocks, front coil springs, new rear leaf springs as well as the necessary bushes and U bolts to install them.
This kit is our Premium Lift kit, and is designed primarily to raise the vehicle and improve the ride on vehicles that do not normally carry a great deal of weight. If you regularly carry heavy loads or tow a trailer, then consider one of our heavy duty kit options
This kit does NOT reduce the load carrying ability compared to the standard Ford Ranger rear spring. However, our rear spring, combined with our specially valved shock, allows for an improvement in the unladen ride, removing some of the harshness that can be felt in the standard vehicle on poor road surfaces. For more information on how we achieve this, please see our technical pages.
This kit will raise the vehicle by approx. 40mm (see actual dimensions below) allowing better ground clearance and improved looks. Can be used to accommodate larger tyres. The dimensions quoted assume a standard vehicle. If you have additional equipment on board at the front such as a winch or bull bar, this will affect the final installed height. If this is the case, please contact us as it may be necessary to supply different springs for your application.
For those using the vehicle in a continuously laden state, please consider one of our heavy duty options.
The fully assembled Ezifit struts in this kit allow quick and easy fitment to your vehicle. These feature a Pedders Foam cell shock, Pedders spring as well as new top mount bump stop and boot. No need to use spring compressors or re-use any old parts. Simply bolt straight on.
These components replace the original items. No other modifications to the vehicle are necessary. After fitting we strongly recommend a wheel alignment is carried out for optimum performance of your vehicle.

Key features

1.75 Inch Lift Kit
Improved ride comfort
Increased Off-Road Ground Clearance
Sintered Iron Piston Shocks with Large 40mm Bore
Premium Grade Steel Coils
All backed by our 2 year / 40,000km warranty

Vehicle Height Information
Front: 840mm with 17 inch wheels
Rear: Approx. 40mm higher than standard.
Notes: Heights should be measured as shown in the secondary picture.

Contents of Kit -
U/Bolt 88 x 14 x 200mm
Pedders Trakryder Leaf Spring
Pedders Trakryder Foam Cell Shock
Pedders EziFit Foam Strut (280067)
Pedders EziFit Foam Strut (280067)
Urethane Leaf Spring Rear Eye Bush (4PKT)