ARB high-volume twin on-board compressor to suit the high volume airflow nedds of most air powered tools and also to suit the actuation ond controls needs of the ARB air locker in the harsh and demanding environment of the ARB air locker user.
Applications
Pneumatic supply and electrical control for ARB Air Lockers. (Air Locker Manifold kit DA6253 required)
Rapid inflation of small, medium and large tires
Air tools rated up to 85LPM (3CFM) @ 6 Bar (90PSI) continous supply
Air tools rated higher than 85LPM (3CFM) @ 6 Bar (90PSI) using an optional air tank suitable to the run time requirements
Pneumatic supply and electrical control for ARB Air Lockers. (Air Locker Manifold kit DA6253 required)
Rapid inflation of small, medium and large tires
Air tools rated up to 85LPM (3CFM) @ 6 Bar (90PSI) continous supply
Air tools rated higher than 85LPM (3CFM) @ 6 Bar (90PSI) using an optional air tank suitable to the run time requirements
Kit Includes
Fully assembled and tested air compressor - 12V
Complete wiring loom w/ Air Locker solenoid plug-in terminals
2x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges
Mounting bolts and washers
Comprehensive phot illustrated installation guide
Fully assembled and tested air compressor - 12V
Complete wiring loom w/ Air Locker solenoid plug-in terminals
2x relocatable splash resistant air filters with washable high-flow sintered bronze filter cartridges
Mounting bolts and washers
Comprehensive phot illustrated installation guide
Features
Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components
Pressure switch controlled air manifold system regulates pressure between 9.3 Bar (135PSI) and 10.3 Bar (150PSI) suited to air tools and all ARB Air Locker equipped vehicles
Highest air flow rate of any 12V compressor of its size on the market @ 174 LPM (6.16CFM)
High efficiency design consumed only 56 amps at maximum air flow
Built with sealed components for moisture and dust resistance
Hard-anodized cylinder bores and PTFE (Teflon) impregnated caron fibre piston seals for reduced friction and maximum trouble free life
Ducted IP55 sealed brushlee DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% dute cycle ( under room temperature conditions)
Anti-vibration / sound deadening is integrated into the mount
Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning
High Density and high flow washable sintered bronze air filter elements
Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (NOTE:- Air Locker Manifold kit DA6837 required to mount solenoids)
Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault
Motors are water sealed, 100% ball bearing equipped (i.e No Bushings used), and feature a unique linear brush pre-load syatem for extra long life, low heat and quiet operation throughout the life of the unit
Motors are internally thermal protected against extreme temperature damage
Compressor pistons are equipped with a heavy European made cylindrical roller bearing
Over-pressure safety vave equipped
Sealed illuminated automotive grade dash switch included
Fully serviceable and all replacement parts available
EMF suppressed for use in proximity to sensitive electronic equipment
CE and C-Tick compliant
Constructed primarily of light weight, high strength, engineering grade materials, including military and aerospace standard components
Pressure switch controlled air manifold system regulates pressure between 9.3 Bar (135PSI) and 10.3 Bar (150PSI) suited to air tools and all ARB Air Locker equipped vehicles
Highest air flow rate of any 12V compressor of its size on the market @ 174 LPM (6.16CFM)
High efficiency design consumed only 56 amps at maximum air flow
Built with sealed components for moisture and dust resistance
Hard-anodized cylinder bores and PTFE (Teflon) impregnated caron fibre piston seals for reduced friction and maximum trouble free life
Ducted IP55 sealed brushlee DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% dute cycle ( under room temperature conditions)
Anti-vibration / sound deadening is integrated into the mount
Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning
High Density and high flow washable sintered bronze air filter elements
Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (NOTE:- Air Locker Manifold kit DA6837 required to mount solenoids)
Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault
Motors are water sealed, 100% ball bearing equipped (i.e No Bushings used), and feature a unique linear brush pre-load syatem for extra long life, low heat and quiet operation throughout the life of the unit
Motors are internally thermal protected against extreme temperature damage
Compressor pistons are equipped with a heavy European made cylindrical roller bearing
Over-pressure safety vave equipped
Sealed illuminated automotive grade dash switch included
Fully serviceable and all replacement parts available
EMF suppressed for use in proximity to sensitive electronic equipment
CE and C-Tick compliant